Kiloview 4K NDI Converter

This module will allow you to control Kiloview 4K NDI Converter devices (N50/N60/FN-50/FN-60). Supports both Encoder and Decoder modes with full API integration.

Configuration

• Device IP / Host — Enter the IP address or hostname of the device
• Protocol — HTTP (port: 80) or HTTPS (port: 443)
• Port — Connection port (auto-defaults to 80 for HTTP, 443 for HTTPS)
• Use Authentication — Enable/disable login credentials
• Username / Password — Device login credentials (default: admin/admin)
• Default Mode — Initial converter mode selection (Encoder/Decoder)
• Enable Polling — Enable polling for feedbacks and variables (recommended: enabled)
• Polling Rates — Configurable intervals for state and NDI source polling
• Verbose Logging — Enable debug-level logging for troubleshooting

Actions

General Actions (All Modes)

• Set Mode — Switch between Encoder and Decoder mode
• Toggle Mode — Toggle between Encoder and Decoder mode
• Refresh Device Status — Manually trigger a status refresh
• Reboot Device — Reboot the Kiloview device
• Reset All NDI Connections — Reset all active NDI connections

Encoder Actions

• Choose Encode Mode — Select encoding mode (HB+HX, HB+Net, HB+Rec, HB Only, HX Only, Net Only)
• Set NDI FULL Color Format — Set NDI HB stream color format (Auto, YCbCr 4:2:0, YCbCr 4:2:2)
• Set NDI FULL Color Depth — Set NDI HB stream color depth (8bit, 10bit)
• Set NDI HX Color Format — Set NDI HX stream color format
• Set NDI HX Color Depth — Set NDI HX stream color depth
• Set NDI HX Codec — Set NDI HX codec (H264, H265)
• Set Net Stream Color Format — Set multi-protocol stream color format
• Set Net Stream Color Depth — Set multi-protocol stream color depth
• Set Net Stream Codec — Set multi-protocol stream codec (H264, H265)
• Set Net Stream Parameters — Enable/disable net stream protocols (RTMP, HLS, UDP, RTP, SRT, RTSP)

Decoder Actions

• Set Preset — Switch to a specific preset (1-9 or Blank)
• Select NDI Source — Select from discovered NDI sources
• Refresh NDI Sources — Manually refresh the list of available NDI sources
• Output with Blank — Output blank video (Preset 0)
• Set Output Resolution — Set output resolution (Auto, 1280x720, 1920x1080, 3840x2160, 4096x2160)
• Set Output Frame Rate — Set output frame rate (Auto, 24-60 fps)
• Add NDI Preset — Add a new NDI preset (ID 1-9) with Name, Group, Channel Name
• Add Net Stream Preset — Add a new net stream preset (ID 1-9) with Name, Protocol, URL
• Remove Preset — Remove an existing preset by ID (1-9)
• Set Blank Color — Set the blank output color (hex value, e.g., #000000)
• Set Discovery Server — Configure NDI discovery server address
• Set Discovery Group/Channel — Set NDI discovery group and channel filters
• Add Manual NDI Source — Manually add NDI sources by name and IP addresses

Feedbacks

General Feedbacks (All Modes)

• Converter Mode — Change button color when current mode matches selected mode (Encoder/Decoder)

Encoder Feedbacks

• Encode Mode — Change button color when encode mode matches
• NDI FULL Color Format — Change button color based on HB stream color format
• NDI FULL Color Depth — Change button color based on HB stream color depth
• NDI HX Color Format — Change button color based on HX stream color format
• NDI HX Color Depth — Change button color based on HX stream color depth
• NDI HX Codec — Change button color based on HX codec (H264/H265)
• Net Stream Color Format — Change button color based on net stream color format
• Net Stream Color Depth — Change button color based on net stream color depth
• Net Stream Codec — Change button color based on net stream codec
• Encoder Video Signal is Online/Offline — Change color based on input video signal presence
• Encoder Audio Source is Online/Offline — Change color based on input audio signal presence
• NDI HB Stream Started — Green when HB stream is actively running
• NDI HX Stream Started — Green when HX stream is actively running
• Net Stream Started — Green when net stream is actively running

Decoder Feedbacks

• Selected NDI Source is Online/Offline — Change color based on current NDI source connection status
• Selected Preset is Enabled — Change color when specified preset is enabled
• Selected Preset is Current Preset — Change color when specified preset is the active one
• Output Resolution is Current Resolution — Change color when resolution matches current output
• Output Frame Rate is Current Frame Rate — Change color when frame rate matches current output

Variables

Common Variables (All Modes)

• Current Converter Mode — Encoder or Decoder
• Authorized User — Currently logged-in user alias
• Device Hostname — Device hostname
• Resolution — Current video resolution
• Audio Format — Current audio format info

Encoder Variables

• Current Encode Mode — Active encoding mode (e.g., HB+HX)
• Current NDI FULL Color Format — HB stream color format
• Current NDI FULL Color Depth — HB stream bit depth (8bit/10bit)
• Current NDI HX Color Format — HX stream color format
• Current NDI HX Bit Depth — HX stream bit depth (8bit/10bit)
• Current NDI HX Codec — HX codec (H264/H265)
• Current Net Stream Color Format — Multi-protocol stream color format
• Current Net Stream Color Depth — Multi-protocol stream bit depth (8bit/10bit)
• Current Net Stream Codec — Multi-protocol stream codec (H264/H265)
• Video Signal Present — Input video signal status (True/False)
• Audio Signal Present — Input audio signal status (True/False)
• NDI Bitrate — NDI target bitrate
• GOP Length — GOP length value
• Profile — Encoding profile
• NDI HB/HX/Net Stream Started — Stream started status (True/False)
• NDI HB/HX/Net Group — Stream group name
• NDI HB/HX/Net Channel — Stream channel name
• NDI HB/HX/Net Connection — Stream connection type
• NDI HB/HX/Net Bitrate — Per-stream bitrate in Mbps

Decoder Variables

• NDI Codec — Current decoding codec
• NDI Stream Name — Current stream name
• URL / IP Address — Current source URL and IP
• NDI Source Online — Source online status (True/False)
• Current Preset ID — Active preset number
• Sampling / Bitrate / Resolution / Color Depth / Aspect Ratio — Stream technical parameters
• Output Resolution / Frame Rate / Sample Rate — Output parameters
• Preset 1–10: Each preset provides Enabled, Group, Name, Device Name, Channel Name, URL, IP, Online, and Current status variables

System Info

• CPU Usage — CPU utilization percentage
• Memory Used — Used memory in KB
• Memory Total — Total memory in KB
• Device Uptime — Formatted uptime string (e.g., 5 Days 12:30:45)

Presets

General Category

• Set Converter Mode to Encoder / Decoder — Mode switch buttons with mode feedback
• Toggle Converter Mode — Toggle mode button
• Refresh Device Status — Status refresh button
• Reboot Device — Reboot button
• Display Current Mode / Hostname — Info display buttons using variables

Encoder Categories

• Encoder — Video/Audio signal status displays; Current encode mode display
• Encoder NDI FULL — Color Format, Color Depth, Bitrate displays + setting buttons for each option
• Encoder NDI HX — Color Format, Color Depth, Codec, Bitrate displays + setting buttons for each option
• Encoder Net Stream — Color Format, Color Depth, Codec, Bitrate displays + setting buttons for each option
• Encoder Mode — Encode mode selection buttons (HB+HX, HB+Net, HB+Rec, HB Only, HX Only, Net Only) with feedback

Decoder Categories

• Decoder — Online state display; Preset 1–10 (P10 = Blank) selection buttons with current-preset feedback
• Decoder Info — Codec, Stream Name, Resolution, Frame Rate, Sample Rate, Bitrate, etc. info displays
• Decoder Output Resolution — Resolution (Auto/720p/1080p/4k) and Frame Rate (Auto/24-60fps) setting buttons with feedback