Sennheiser

Sennheiser Digital 6000 Radio Microphone System

Control and monitor the EM 6000, EM 6000 Dante and L 6000 via Sennheiser Sound Control Protocol (UDP).

Actions

EM 6000

• Antenna Booster
• Audio Output Level
• Display Brightness
• Identify
• Reciever Bank & Channel
• Reciever Carrier Frequency
• Reciever Encryption
• Reciever Mute
• Reciever Name
• Transmitter Sync Settings

L 6000

• Identify

Feedbacks

EM 6000

Advanced Feedbacks

• Reciever Status

RF Meters (Yellow) range -100dBm to -50dBm. RF A always on top/left side regardless of orientation. Includes Diversity & Peak LEDs.

LQI Meter (Blue) range 0% to 100%

AF meter (Tri-colour) range -50dBFS to 0dBFS. Includes Signal Presence ( > -100dBFS ) and Peak LEDs.

Boolean Feedbacks

• AF Peak
• Audio Mute
• Active Status
• Active Warning
• Booster
• Clock Source
• Diversity
• Encryption
• RF Peak
• Test Tone Active

L 6000

Advanced Feedbacks

• Battery Status

Boolean Feedbacks

• Device Hot
• Fan Warning
• Slot Warning

Variables

EM 6000

Device

• Name
• Version

Output

• Level

Recieve Channel

• Active Bank
• Active Channel
• Carrier Frequency
• Name
• Test Tone Level
• RF 1 Level
• RF 2 Level
• AF Level
• LQI

SKX Transmitter

• Battery - Percent
• Battery - Time
• Capsule, Gain
• Limit - Low
• Limit - High
• Lowcut
• Name
• Type

System

• Brightness
• Clock
• Clock Frequency

L 6000

Device

• Name
• Version

Battery Slot

• LED
• LED Meaning
• Type

Battery

• Capacity
• Current
• Cycle Count
• Energy
• Operating Time (H)
• Operating Time (Min)
• State of Charge
• State of Health
• Temperature
• Voltage
• Time to Full (H)
• Time to Full (Min)

Presets

EM 6000

• Reciever Status

L 6000

• Battery Status
• Device Status

Not Supported

The following controls or feedbacks are not supported by the SSC API.

EM 6000

• Transmission Mode (LR, LD)
• Command Mode
• Tx Sync Settings: Name, Power LED Mode, RF Power.

Release History

1.0.0

Initial Release

1.0.6

Support sequential actions

Use Node 22

1.0.7

Parse local variables