Roland

Roland V-60HD

This module will allow you to control a Roland V-60HD video switcher.

The Roland only accepts 1 connection at a time

Configuration

• Enter the IP address of the device in the configuration settings.
• The device will use TCP port 8023.
• There is a config setting for the period of the timer used to poll the device for status.

Available actions:

• Select channel for final video output
• Select channel for preset video
• Select channel to send to AUX bus
• Select transition effect
• Set video transition time
• Press the [CUT] button
• Press the [AUTO] button
• Press the [PinP 1] button
• Press the [PinP 2] button
• Press the [SPLIT] button
• Press the [DSK] button
• Press the DSK [PVW] button
• Press the DSK [AUTO MIXING] button
• Press the DSK [OUTPUT FADE] button
• Adjust display position of inset screen assigned to the [PinP 1] button
• Adjust display position of inset screen assigned to the [PinP 2] button
• During split composition, adjust the display position of the video
• During DSK composition, set the channel of the overlaid logo or image
• Adjust the key level (amount of extraction) for DSK composition
• Adjust the key gain (semi-transmissive region) for DSK composition
• Select input connector for channel 6
• Set the output bus to assign to the SDI OUT 1 connector
• Set the output bus to assign to the SDI OUT 2 connector
• Set the output bus to assign to the HDMI OUT 1 connector
• Set the output bus to assign to the HDMI OUT 2 connector
• Set HDCP on/off
• Call up preset memory

Available feedbacks: Input status for Program, Preset and Aux Status for DSK, Output Fade and PinP/SPLIT