NovaStar Controller

This module will allow you to control the following NovaStar products: MCTRL4K, VX4S, VX6S, NovaProHD, NovaPro UHD Jr,VX1000, VX600, VX16s And J6

There is also some support for MSD300, MCTRL300, MCTRL500, MSD600, MCTRL600, MCTRL660. Some of these models can be controlled with a RS232 interface bridge.

Configuration

• Enter the IP address of the device in the configuration settings.
• The device will use TCP port 5200.

Available actions:

• Change Brightness
• Set Brightness (0.5% - 100%)
• Change Test Patterns
• Change Display Mode
• Change working mode on VX6S AND J6
• Recall Presets on VX6s, UHD Jr, VX600, VX16s, VX1000, J6
• Change main and PIP layer settings for VX1000

VX4S, VX6S, NovaProHD, NovaProHDJr only:

• PIP On/Off
• Change Scaling
• Recall Presets

Contributions for development and maintenance of this open source module are always welcome https://github.com/sponsors/istnv