marshall-ipcamera
Marshall Cameras
This module will allow you to control all variants of the following Marshall IP cameras:
- CV355, CV420, CV420e, CV620, CV630, CV730
Please make sure, that you install the latest firmware for your camera, because not all firmwares support remote control with this module. <br>You can select your IP camera <a href="https://marshall-usa.com/cameras/#IPTV" target="_blank">here</a> and download the latest firmware.
Configuration
- Enter the IP address of the device as well as the username and password in the configuration settings.
- There is a config setting for the period of the timer used to poll the device for status (small periods can impact performance!)
Available Actions:
- Audio: Delay ON/OFF
- Audio: Delay Time
- Audio: Input Level
- Audio: Input ON/OFF
- Audio: Input Volume
- Audio: Set Codec
- Camera: HDMI Output Format
- Camera: Image Orientation
- Camera: Image Overlay
- Camera: Output Source
- Camera: Set Video Norm
- Custom: Send CGI Command
- Exposure: Gain
- Exposure: Iris
- Exposure: Set Compensation
- Exposure: Set Mode
- Exposure: Shutter Speed
- Focus: AF Frame
- Focus: AF Sensitivity
- Focus: Manual Adjust
- Focus: One Push AF Trigger
- Focus: PTZ Assist ON/OFF
- Focus: Set Mode
- Image: Custom Brightness
- Image: Custom Gamma
- Image: Custom Hue
- Image: Custom ON/OFF
- Image: Custom Saturation
- Image: Custom Sharpness
- Image: Noise Reduction
- Image: Picture Effect
- Image: Wide Dynamic Range
- NDI: ON/OFF
- Pan/Tilt: Motion Speed
- Pan/Tilt: Move
- Pan/Tilt: Set Limits
- Pan/Tilt: Set Startup Position
- Pan/Tilt: Speed Compensation ON/OFF
- Presets: Call Home Position
- Presets: Call Mode
- Presets: Execute Action
- Presets: Execution Speed
- Presets: Preload AF
- Presets: PTZ Motion Sync ON/OFF
- Presets: Select Action
- Streams: Live ON/OFF
- Streams: Set Config
- Streams: Streams ON/OFF
- Tally: Brightness
- Tally: Command Mode
- Tally: ON/OFF
- White Balance: Red/Blue Gain
- White Balance: Select Mode
- White Balance: Select Preset
- Zoom: Digital Zoom Limit
- Zoom: Manual Adjust
- Zoom: Speed
Available Feedbacks:
- Audio: Delay ON/OFF
- Audio: Input ON/OFF
- Camera: HDMI Output Format
- Camera: Output Source
- Camera: Overlay ON/OFF
- Camera: Video Norm
- Exposure: Mode
- Focus: Face Priority
- Focus: Mode
- Focus: PTZ Assist ON/OFF
- Image: Custom ON/OFF
- Image: Picture Effect
- NDI: ON/OFF
- Pan/Tilt: Limit ON/OFF
- Pan/Tilt: Motion Speed
- Pan/Tilt: Speed Compensation ON/OFF
- Presets: Call Mode
- Presets: Execution Speed
- Presets: Preload AF ON/OFF
- Presets: PTZ Motion Sync ON/OFF
- Presets: Selected Action
- Restart: Events
- Streams: Live ON/OFF
- Streams: Stream ON/OFF
- Tally: ON/OFF
- White Balance: Mode
- White Balance: Preset
- Zoom: Active Zooming
- Zoom: Digital Zoom Limit
Available Variables:
- Audio Delay Time
- Audio Level
- Audio Volume
- Image Orientation
- Model
- Uptime
- Video Norm
- Exposure Compensation
- Gain
- Iris
- Exposure Mode
- Shutter Speed
- Focus Mode
- 2D Noise Reduction
- 3D Noise Reduction
- Brightness
- Gamma
- Hue
- Saturation
- Sharpness
- Wide Dynamic Range
- Preset Call Mode
- Preset Execution Speed
- Motion Speed
- Pan Left Limit
- Pan Right Limit
- Tilt Down Limit
- Tilt Up Limit
- Stream1 Bitrate
- Stream1 Frame Rate
- Stream1 Mode
- Stream1 Resolution
- Stream2 Bitrate
- Stream2 Frame Rate
- Stream2 Mode
- Stream2 Resolution
- Stream3 Bitrate
- Stream3 Frame Rate
- Stream3 Mode
- Stream3 Resolution
- Blue Gain
- Red Gain
- White balance Mode
- Digital Zoom Limit
- Zoom Speed
Manufacturer
Marshall
Marshall
Products
CV355
CV420
CV420e
CV620
CV630
CV730
Author
Issues (6)
To file a new issue, you need to sign up for a user on GitHub.
Go to GitHub issues →