bmd-teranex

Blackmagic Design Teranex

This module will connect to any Blackmagic Design Teranex device. Not all settings work with every model of Teranex. Where necessary, supported devices are indicated in the options.

Actions

1. Set video input
2. Set audio input
3. Recall/Save preset
4. Test pattern
5. Output display
6. Output format
7. Variable aspect ratio
8. Video Adjust: Set/Increase/Decrease Red, Green, Blue Values
9. Video Adjust: Set/Increase/Decrease Luma Low/High Values
10. Video Adjust: Set/Increase/Decrease Chroma Low/High Values
11. Video Adjust: Set/Increase/Decrease Aspect Fill/Cb/Cr Values
12. Video Proc Amp: Set/Increase/Decrease Gain Value
13. Video Proc Amp: Set/Increase/Decrease Black Value
14. Video Proc Amp: Set/Increase/Decrease Saturation Value
15. Video Proc Amp: Set/Increase/Decrease Hue Value
16. Video Proc Amp: Set/Increase/Decrease RY/BY Values
17. Video Proc Amp: Set/Increase/Decrease Sharp Value
18. Genlock: Set Reference Output Signal
19. Genlock: +/- Pixel Offset by X
20. Genlock: +/- Line Offset by X
21. Genlock: Line Offset to Top/Bottom of Range
22. Genlock: Pixel Offset to Top/Bottom of Range
23. Genlock: Set Type
24. Noise Reduction:
    • Enabled/Disabled
    • Bias Level
    • Split Screen Enabled/Disabled
    • Red Overlay Enabled/Disabled
25. Video Advanced
    • Clean Cadence Enabled/Disabled
    • Scenecut Detect Enabled/Disabled
    • Source Type
    • FRC Aperture
    • Processing

Feedbacks

• Video input: Change background color
• Audio input: Change background color
• Signal is present
• Noise Reduction
  • Enabled/Disabled
  • Split Screen Enabled/Disabled
  • Red Overlay Enabled/Disabled

Variables

• Connection Status

• Input Video Format

• Selected Video Input

• Selected Audio Input

• Seelcted Video Output

• Video Adjust Red/Green/Blue

• Video Adjust Luma Low/High

• Video Adjust Chroma Low/High

• Video Adjust Aspect Fill Luma/Cb/Cr

• Video Proc Amp Gain/Black/Saturation/Hue/RY/BY/Sharp

• Genlock Reference

• Genlock Pixel/Line Offset

• Genlock Signal Locked

• Genlock Type

• Noise Reduction

  • Enabled/Disabled
  • Bias Level
  • Split Screen Enabled/Disabled
  • Red Overlay Enabled/Disabled

• Video Advanced

  • Clean Cadence Enabled/Disabled
  • Scenecut Detect Enabled/Disabled
  • Source Type
  • FRC Aperture
  • Processing

• Variable Aspect Ratio

  • Size X/Y Left/Right
  • Pos X/Y Left/Right
  • Trim X/Y Left/Right
  • Zoom/Crop