In this section you'll learn what Buttons does, and meet its most basic building block: the connection.
One system instead of many#
A live production uses many devices and programs: a video switcher, an audio mixer, a media server, a router, lighting. Each has its own control software and its own way of showing what it's doing.
Bitfocus Buttons brings them together. It gives you one system that can:
- Control devices: send commands, such as cutting to a camera or starting a clip.
- Show device state: show what a device is doing right now, such as which camera is on air or what level a fader is at.
- Automate: run actions without anyone pressing anything, on a schedule or when something changes.
- Route signals: decide which source feeds which destination across the facility.
You use Buttons through controls in a browser, on an iPad or on hardware panels such as a Stream Deck.
A connection represents one device#
Buttons talks to each device through a connection. One connection represents one controlled device, application or service. A studio might have separate connections for its video switcher, its audio mixer and its media server.
Each connection uses a module, the piece of software that knows how to talk to that type of device. You pick the module when you add the connection, for example Blackmagic Design ATEM for an ATEM switcher.
What a connection gives you#
A connection can make four kinds of things available to the rest of Buttons:
Item | What it is | Example |
|---|
Actions | Commands Buttons can send to the device | Set the program input, recall a scene, start playback |
Feedbacks | Reports of the device's state that can change how a button looks | A button turns red when its camera is on Program |
Variables | Current values you can show or use | -12 dB, Camera 2, slide 7 of 24 |
Presets | Ready-made buttons supplied by the module, where it has them | A ready-built "Cut" button for an ATEM |
Which actions, feedbacks, variables and presets you get depends on the module and on the device itself. A small switcher offers fewer than a large one.
Two kinds of preset#
Buttons uses the word "preset" for two different things:
- A connection preset is a ready-made button design that comes with a connection's module.
- A routing Preset is a saved set of routes, used to put several signal routes back the way they were. You'll meet these in section 6.
When you read "preset" in Buttons, check which one is meant.