Visual Productions

Visual Productions TimeCore

This module enables Companion to control the TimeCore device.

Setup

• Enter the IP of your TimeCore device into the module configuration.
• If you have changed the Receiving TCP Port of your device, you can adjust it in the configuration. Otherwise, leave it as the default (7000)

Actions

• Execute action – Run an action from the device with optional argument
• Set action list state – Enable or disable an action list
• Set timecode state – Start, Stop, Restart, or Pause internal timecode
• Set timecode frame – Set the internal timecode value (format: HH:MM:SS.FF)
• Set timer state – Start, Stop, Restart, or Pause a timer (1–4)
• Set timer value – Set the value for a specific timer (format: HH:MM:SS.t)
• Set variable value – Set a variable on the device
• Refresh variable – Refresh a single variable from the device
• Refresh all variables – Refresh all variables from the device
• Core blink – Trigger device blink

Feedbacks

• Timer Below Value – Active when the selected timer (1–4) is below the given timecode threshold (e.g. light up when under 10 seconds)
• Receiving – Active when the selected external timecode source is receiving (SMPTE, MIDI, Art-Net, RTP MIDI, sACN, TCP, or UDP)

Variables

• Device Uptime (uptime)
• Internal Timecode Value (tc_internal)
• Timecode Internal FPS (tc_internal_fps)
• Received SMPTE Timecode Value (tc_smpte)
• Timecode Received SMPTE FPS (tc_smpte_fps)
• Received MTC Timecode Value (tc_mtc)
• Timecode Received MTC FPS (tc_mtc_fps)
• Received Art-Net Timecode Value (tc_artnet)
• Timecode Received Art-Net FPS (tc_artnet_fps)
• Received RTP-MIDI Timecode Value (tc_rtpmidi)
• Timecode Received RTP-MIDI FPS (tc_rtpmidi_fps)
• Receiving SMPTE (receiving_smpte) – boolean
• Receiving MIDI (receiving_midi) – boolean
• Receiving Art-Net (receiving_artnet) – boolean
• Receiving RTP-MIDI (receiving_rtpmidi) – boolean
• Receiving sACN (receiving_sacn) – boolean
• Receiving TCP (receiving_tcp) – boolean
• Receiving UDP (receiving_udp) – boolean
• Timer 1 (timer_1)
• Timer 2 (timer_2)
• Timer 3 (timer_3)
• Timer 4 (timer_4)