LDWall LVP615

This module was designed for the LDWall LVP615.

Configuration

1. Configure your LVP615 with an IP address and enter it into the Target IP field. Default wired IP is 192.168.1.8.
2. Configure your LVP615 with a Port and enter it into the Target Port field. Default wired Port is 7.
3. Configure the Serial Number of your LVP615 and enter it into the Serial Number field. Default set to 0 to allow communication with all devices.

Actions

Input Switch

Switch to selected input. The command only is valid in one key direct switch.

Brightness Level

Change to selected brightness level. Range from 0-64 or 0-100. The range depends on brightness level and the brightness stepping is 2.