Turtle AV

Turtle AV Mineola

This module uses HTTP & WebSockets to control the Turtle AV Mineola audio processor.

Minimum Supported Firmware

• Mineola 2x2: v1.10.10
• Mineola 8x8: 1.10.09

---

Actions

Power

• Power - Turn the device on/off or toggle
• Reboot - Reboot the device

Input Controls

• Gain - Adjust input gain (-12dB to +12dB)
• Mute - Mute/unmute input channels
• Name - Set input channel name
• Phantom Power - Enable/disable 48V phantom power
• Sensitivity - Set input sensitivity level (+24dBu, +14dBu, +4dBu, 0dBV, -18dBV, -35dBV)

Output Controls

• Delay - Set output audio delay (0-50ms)
• Gain - Adjust output gain (-60dB to +12dB)
• Level - Set output reference level (+20dBu, +14dBu, +4dBu, 0dBV, -18dBV)
• Master Output Member - Add/remove output from master group
• Mute - Mute/unmute output channels
• Name - Set output channel name

Output Master

• Mute - Mute/unmute master output
• Volume - Adjust master output volume (0-100)

Preset Management

• Clear - Clear a preset slot
• Name - Set preset name
• Recall - Load a saved preset
• Save - Save current settings to preset

---

Feedbacks

Device Information

• DEP SDK version
• Hostname
• IP Address (Primary & Secondary)
• MAC Address (Primary & Secondary)
• MCU Version
• Model Name
• Firmware Version

Input Status

• Gain
• Mute state
• Channel name
• Phantom power state
• Sensitivity
• Signal level

Output Status

• Audio delay
• Gain
• Master output membership
• Mute state
• Channel name
• Output level
• Signal level

Output Master Status

• Mute state
• Volume level

Power & Presets

• Power state
• Preset name
• Preset validity

---

Variables

All feedback values are available as variables for use in button text and expressions.