Telycam

Telycam PTZ IP Camera

Control plugin for Telycam PTZ IP Cameras via VISCA over UDP and HTTP CGI API.

Connection Settings

• Host: Camera IP address (e.g., 192.168.31.56)
• VISCA Port: UDP port for VISCA commands (default: 52381)
• HTTP Port: HTTP port for CGI API (default: 80)

Features

Pan/Tilt Control

• Directional movement (8 directions)
• Stop and Home commands
• Adjustable speed

Lens Control

• Zoom In/Out (variable speed)
• Focus Near/Far (auto and manual)
• One-push autofocus

Presets

• 50 preset positions (Recall/Save)
• Adjustable recall speed

Image Settings

• Brightness, Sharpness, Saturation, Contrast, Gamma (UP/DOWN with current value tracking)
• WDR Level adjustment
• BLC (Backlight Compensation) ON/OFF
• D-WDR ON/OFF
• 2DNR/3DNR modes

Exposure

• Auto / Manual / Shutter Priority / Iris Priority / Bright Priority modes
• Shutter, Iris, Gain adjustment

White Balance

• Auto / Indoor / Outdoor / OnePush / ATW / Manual modes
• R/G/B Gain adjustment

System

• Power ON/OFF
• Day/Night (IR Cut) mode
• Tally light control

Protocol Notes

• VISCA over UDP: Used for PTZ, zoom, focus, presets, and image parameter direct commands
• HTTP CGI API: Used for reading current status and some image settings
• Image parameters (brightness, sharpness, etc.) support UP/DOWN by reading current value via HTTP and sending VISCA direct command

Variables

• wb_mode: Current white balance mode
• exposure_mode: Current exposure mode
• focus_mode: Current focus mode