Tascam

Tascam DA-6400 Multichannel Audio Recorder

This module will control the Tascam DA-6400.

• Tascam DA 6400 Page

Configuration

Enter the IP address, port and password of the recorder.

Actions

• Stop

This stops the controlled device.

• Play

This starts controlled device playback.

• Record

This puts the controlled device into recording or recording standby status.

• Pause

This pauses playback of the controlled device.

• Search

This starts search playback on the controlled device.

• Skip

This skips on the controlled device.

• Repeat Mode

This sets the repeat mode of the controlled device.

• Remote/Local Select

Set whether operations using the controlled device itself are enabled or disabled.

• Play Mode Select

This sets the play mode of the controlled device.

• Current Track Time

This requests that time information about the current take (or take being recorded) be returned. (Hour, minute, second, frame)

• Mark - Delete

Delete a mark on the controlled device.

• Mark - Set

This sets a mark on the controlled device.

• Mark - Direct Skip Preset

Specify a mark number to skip to it.

• Project Delete

This deletes a project.

• Project Select

Specify the project number to change the current project.

• Project Skip

This changes the project.

• Rebuild Project

This rebuilds the current project/session.

• Chase Select

This turns the chase mode of the controlled device on/off.

• TC Restart

This restarts the controlled device TC GENERATOR from the START TIME.

• TC Generator Mode

This sets the TC GENERATOR mode of the controlled device.

• TC Frame Type

This sets the TC FRAME TYPE of the controlled device.

• TC Output Mode

This sets the TC mode output by the TC output connector of the controlled device.

• Clock Master Select

Set the master clock of the controlled device.

• Word Thru Select

This sets the WORD/VIDEO SETUP of the controlled device.

• Bit Length Select

This sets the bit length used by the controlled device.

• Pause Mode

This sets the PAUSE mode of the controlled device.

• Audio Over Marker

This sets the AUDIO OVER MARKER of the controlled device.

• Time Interval Marker

This sets the TIME INTERVAL MARKER of the controlled device.

• Time Interval Marker Time

This sets the TIME INTERVAL MARKER TIME of the controlled device

• Sync Unlock Marker

This sets the SYNC UNLOCK MARKER of the controlled device.

• REC FS Select

This sets the REC FS used by the controlled device.

• File Name Select

This sets the FILE NAME used by the controlled device.

• Media Format

This formats the specified media of the controlled device.

• Aux Assign Key

This sets the AUX KEY ASSIGN of the controlled device.

• Aux Assign Key Tally

This sets the AUX TALLY ASSIGN of the controlled device.

• Meter Peak Hold Time

This sets the METER PEAK HOLD TIME used by the controlled device.

• Meter Peak Clear

Clear meter peak holds on the controlled device.

• Digital Reference Level

This sets the DIGITAL REFERENCE LEVEL used by the controlled device.

• Take Erase

Erase a specified take in the current project on the controlled unit.

• Direct Track Search Preset

Specify a take number to search for it directly.

• Record Function

This turns the record function of the controlled device on/off.

Variables

• Caution Status
• Error Status
• Track Number
• Track Time
• Track Time: Hours
• Track Time: Minutes
• Track Time: Seconds
• Track Time: Frames

Feedbacks

• Caution
• Error
• Mecha Status
• PSU Error Undocumented. Presumed only relevant for the DA-6400dp. Unknown how to query state - module assumes device is OK on connect.
• Repeat Mode
• Remote/Local Mode
• Keyboard Type
• Chase Mode
• TC Generator Mode
• TC Frame Type Mode
• TC Output Mode
• Clock Master
• Word Through
• Bit Length
• Pause Mode
• Play Mode
• Audio Over Marker
• Time Interval Marker
• Sync Unlock Marker
• Record Sample Rate
• File Name
• Meter Peak Time
• Digital Reference Level
• Track Armed

Version History

Version 1.3.0

• Track Armed Feedback
• Parse local variables in actions

Version 1.2.5

• Use Node 22

Version 1.2.4

• Update dependencies
• Minor fixes

Version 1.2.3

• Fix password regex

Version 1.2.2

• Better status updates
• Transport preset layout
• Update companion module base to 1.8.0

Version 1.2.1

• Add record preset

Version 1.2.0

• Add transport & status presets
• Update companion-module-tools to 1.5.0

Version 1.1.3

• Bug fixes & timer safety

Version 1.1.1

• Bug fixes
• Update help
• Update companion module base to 1.7.0

Version 1.1.0

• Seperate track time variables for Hours, Minutes, Seconds & Frames
• Update companion module base to 1.6.0, update companion module tools to 1.4.2
• Add feedbacks
• Add learn function to many actions
• Code refactor

Version 1.0.2

• Initial release