Sharp

Sharp TV

This module will connect to a Sharp TV, it was build around a PN-LE901, but should work with most Sharp TV's/monitors with a network connection.

Note:

The "Network Card ON" action needs to be sent to the TV at least once while the tv is turned on, to enable power on/off functionality. And for any tv to work with this module, you will need to disable all energy-saving features on the TV, as these disables communication via IP and serial connections.

Also, the manual has these notes:

• Configure settings required for connection to a network in “System Setting” – “Ethernet” on the CONTENT MENU screen of APPLICATION mode.
• When POWER SAVE MODE is set to ON, the control is disabled in the standby mode.
• To control the monitor via LAN, set RS-232C/LAN SELECT to LAN. Set “Telnet Server” to “ON” on “Setup” in APPLICATION mode.

Available commands for Sharp TV's

• Network Card ON
• Network Card OFF
• Standby Power ON
• Standby Power OFF
• Input Select TV
• Input Select
• AV Mode Selection
• Set Volume
• View Mode
• Channel (Analog)
• Channel (Digital <10000)
• Channel (Digital >10000)
• Channel Up
• Channel Down
• Myte Audio ON
• Mute Audio OFF
• Toggle Mute Audio
• Surround Audio ON
• Surround Audio OFF
• Toggle Surround Audio
• Toggle Closed Captions
• Sleep Timer

Not Implementet

• Position
• Device Name
• Model Name
• Software Version
• IP Protocol Version
• Remote Control Buttons