roland-xs62s

Roland XS-62S

This module will allow you to control a Roland XS-62S video switcher.

Configuration

• Enter the IP address of the device in the configuration settings.
• The device will use TCP port 8023.

Available actions:

• Select channel for final video output
• Select channel for preset video
• Select channel to send to AUX bus
• Select transition effect
• Set video transition time
• Press the [CUT] button
• Press the [TAKE] button
• Set the [PinP] button on/off
• Set [SPLIT] on/off
• Set [DSK] on/off
• Preview the DSK composited result in the multi-view monitor
• Set the [AUTO MIXING] button on/off
• Set the [FREEZE] button on/off
• Set the EDID of HDMI Inputs
• Input scaling type setting
• Resolution setting for scaler out
• Set scaling type of scaler out
• Select the color space for the HDMI output
• Set the signal type for the HDMI output
• Adjust display position of inset screen assigned to the [PinP] button
• During split composition, adjust the display position of the video
• During DSK composition, set the channel of the overlaid logo or image
• Adjust the key level (amount of extraction) for DSK composition
• Adjust the key gain (semi-transmissive region) for DSK composition
• Select input connector for channel 6
• Set the bus assigned to the video output connector
• Adjust input volume level for PGM bus audio
• Adjust input volume level for PGM bus audio
• Adjust output volume level for master out
• Adjust output volume level for PVW audio
• Adjust output volume level for Aux audio
• Adjust delay time of input audio
• Assign the bus for an audio output connector
• Set HDCP on/off
• Call up preset memory
• GPO Outputs on/off
• Operation mode for video transition
• Camera Control