roland-vr120hd

Roland VR-120HD

This module will allow you to control a Roland VR-120HD.

You must set the password on the VR-120HD in order to make a connection.

[MENU] Button > “Network” > “LAN Setup” > Use the [VALUE] knob to select “Network Password”, and press the [VALUE] knob. The Network Password screen appears.

Configuration

• Enter the IP address of the device in the configuration settings.
• The device will use TCP port 8023.

Actions

• Run Macro
• Assign Input
• Assign Output
• Assign Aux
• PnP & Key Enable/Disable
• Set Transition Type
• Set Mix Type
• Set Wipe Type
• Set Wipe Direction
• Set PnP & Key Source
• Set PnP & Key Type
• Set DSK Key Source
• Set DSK Fill Source
• Set DSK Key Type
• Select PGM Source
• Select PVW Source
• Load Memory Trigger
• Save Memory Trigger
• Initialize Memory Trigger
• Camera Control - Pan
• Camera Control - Tilt
• Camera Control - Pan/Tilt Speed
• Camera Control - Zoom
• Camera Control - Focus
• Camera Control - Auto Focus
• Camera Control - Exposure

Feedbacks

Variables

Presets