RØDE

RØDECaster Video

This module can be used to communicate with a RØDECaster Video switcher.

Documentation

Actions

• Control Buttons
  • Directly control buttons on the device.
• Input Sources
  • Used for direct control of input sources.
• Scene Sources
  • Used for direct control of scenes.
• Media Sources
  • Used for direct control of media sources.
• Overlay Sources
  • Used for direct control of overlays.
• Audio Sources
  • Control audio sources, including level, gain and mute.
• Audio Delay
  • Control master audio delay value.
• Transitions
  • Control transition type and time.
• Auto Switching
  • Enable/Disable/Toggle auto switching.
• Logo
  • Enable/Disable/Toggle logo watermark.
• Frame Rate
  • Change the frame rate of the device.
• Keying
  • Enable/disable keying on input sources.
• Video Outputs
  • Controls video outputs.
• Set Media Bank
  • Change Media bank settings.
• Set Overlay Bank
  • Change Overlay bank settings.
• Set Input Bank
  • Control video inputs.
• Switching Mode
  • Control switching mode.
• System Commands
  • Perform system actions, including shutdown and reboot

Feedbacks

All feedbacks are booleans, which allows them to be used in triggers.

• Control State
  • Provides feedback for button state of physical device, including PGM, PVW, Idle and Unavailable.
• Input State
  • Provides feedback for specific input, including PGM, PVW, Idle and Unavailable.
• Scene State
  • Provides feedback for specific scene, including PGM, PVW, Idle and Unavailable.
• Media State
  • Provides feedback for specific media, including PGM, PVW, Idle and Unavailable.
• Overlay State
  • Provides feedback for specific overlay, including PGM, PVW, Idle and Unavailable.
• Streaming State
  • Provides feedback if the device is streaming or ready to stream.
• Recording State
  • Provides feedback if the device is recording or ready to record.
• Audio Source Status
  • Provides feedback on audio channels and mixes, including current level, gain and mute state.
• Auto Switching State
  • Provides feedback on if auto switchin is enabled or not.
• Logo State
  • Provides feedback on if the logo watermark is enabled or not.
• Keying Status
  • Provides feedback based on an input's keying status.
• Video Outputs
  • Provides feedback based on video output state.
• Audio Meters
  • Show Audio Meters for live mix channels.
• Switching Mode
  • Provides feedback based on Switching Mode.
• Visual Switcher
  • Show a visual representative of the main RCV buttons.
• Current Transition
  • Set the icon to the currently seleected transition.

Variables

Show Information

• $(RCV:show_name)
• $(RCV:stream_timecode)
• $(RCV:record_timecode)
• $(RCV:audio_delay_frames)
• $(RCV:audio_delay_ms)
• $(RCV:transition_time)

Device Settings

• $(RCV:device_model)
• $(RCV:device_name)
• $(RCV:device_swversion)
• $(RCV:device_serial)
• $(RCV:device_ipaddress)
• $(RCV:device_fanspeed)
• $(RCV:frame_rate)
• $(RCV:active_menu)
• $(RCV:sync_active)
• $(RCV:sync_device)

Input Sources

• $(RCV:input_1_name)
• $(RCV:input_2_name)
• $(RCV:input_3_name)
• $(RCV:input_4_name)
• $(RCV:input_5_name)
• $(RCV:input_6_name)

Scene Source Names

• $(RCV:scene_A_name)
• $(RCV:scene_B_name)
• $(RCV:scene_C_name)
• $(RCV:scene_D_name)
• $(RCV:scene_E_name)
• $(RCV:scene_F_name)
• $(RCV:scene_G_name)

Media Source Names

• $(RCV:media_A_name)
• $(RCV:media_B_name)
• $(RCV:media_C_name)
• $(RCV:media_D_name)
• $(RCV:media_E_name)
• $(RCV:media_F_name)
• $(RCV:media_G_name)

Overlay Source Names

• $(RCV:overlay_A_name)
• $(RCV:overlay_B_name)
• $(RCV:overlay_C_name)
• $(RCV:overlay_D_name)
• $(RCV:overlay_E_name)
• $(RCV:overlay_F_name)
• $(RCV:overlay_G_name)

Wireless Device Status

• $(RCV:wireless1_connected)
• $(RCV:wireless1_signal)
• $(RCV:wireless1_battery)
• $(RCV:wireless1_charging)
• $(RCV:wireless1_muted)
• $(RCV:wireless1_record)
• $(RCV:wireless2_connected)
• $(RCV:wireless2_signal)
• $(RCV:wireless2_battery)
• $(RCV:wireless2_charging)
• $(RCV:wireless2_muted)
• $(RCV:wireless2_record)

Storage Information

• $(RCV:storage_usb_data_used)
• $(RCV:storage_usb_data_remain)
• $(RCV:storage_usb_percent)
• $(RCV:storage_sd_data_used)
• $(RCV:storage_sd_data_remain)
• $(RCV:storage_sd_percent)

Audio Sources

• $(RCV:master_live_L (db)
• $(RCV:master_live_R (db)
• $(RCV:<channel>-<mix>_setlevel) (db)
• $(RCV:<channel>-<mix>_setgain) (db)
• $(RCV:<channel>-<mix>_livelevelL) (db)
• $(RCV:<channel>-<mix>_livelevelR) (db)