Net Insight

Net Insight Nimbra Edge

Getting Started

1. Enter the hostname of your Nimbra Edge server (e.g. edge.nimbra.io). The module connects over HTTPS, on port 443 unless you set another port. If the server uses a self-signed or internal certificate, enable Accept self-signed / untrusted certificates.
2. Enter the username and password of a Nimbra Edge user. It is recommended to create a dedicated user for this connection.
3. Optionally adjust the poll interval (default 5 seconds).

Actions

• Route Input to Output – route a specific input to a specific output (or disconnect it).
• XY: Select Output / XY: Take Input – router-style: select a destination, then press a source to route it.
• Restart Appliance – restarts an appliance. Streams through it will be interrupted.

Feedbacks

• Input Health State / Output Health State – match a health state, or any unhealthy state.
• Output Routed from Input – tally for direct routing buttons.
• XY: Output Selected / XY: Input is routed to selected output – tally for XY buttons.
• Appliance Status – match a connection state, or not connected.
• Appliance CPU / Memory Above Threshold – CPU or memory usage at or above a percentage.
• Alarm Active – any active alarm at or above a severity, optionally for one input/output.

Variables

• Counts: input_count, output_count, appliance_count, appliance_offline_count, alarm_count, alarm_critical, alarm_major, alarm_minor, alarm_warning
• XY: selected_output_name, selected_output_source_name
• Per input: input_<id>_name, _status, _status_detail, _appliance, _type, _format, _services, _enabled, _alarms, _outputs
• Per output: output_<id>_name, _status, _status_detail, _appliance, _type, _format, _services, _enabled, _alarms, _source, _input_id
• Per appliance: appliance_<id>_name, _status, _status_detail, _cpu, _memory, _type, _regions, _alarms, _last_seen

_status is a short state label (e.g. Connected, Input error); _status_detail is the server's full description, when it gives one.

<id> is the Edge id (UUID) of the input, output or appliance. output_<id>_input_id holds the id of the routed input (empty when disconnected), matching the input option of Route Input to Output.

Presets

Generated automatically from the server:

• XY routing – a take button per input and a select button per output.
• Status – active alarm count and per-severity counts, plus a status button per input, output and appliance.