Luminex

Luminex GigaCore

Control your Luminex GigaCore

For second generation GigaCore's, firmware version 1.2.0 or later is advised. Earlier versions may work but were not tested.

• GigaCore O26-I
• GigaCore S30-I
• GigaCore30i
• GigaCore20t
• GigaCore18t
• GigaCore16t
• GigaCore16i
• GigaCore10i
• GigaCore10t
• GigaCore16tf
• GigaCore10t-IP

For first generation GigaCore's, firmware version 3.0.2 or later is advised. Earlier versions may work but were not tested

• GigaCore10
• GigaCore12
• GigaCore14R
• GigaCore16Xt
• GigaCore16RFO
• GigaCore26i

The devices have to be reachable over the Bitfocus Companion network.

Configuration

• Type in the IP address of the device. Any IP on which the GigaCore Web interface can be reached, should work.
• If authentication is enabled on the device, provide the password.
• Check the 'Gen1' checkbox if you are targetting a first generation GigaCore:
  • GigaCore10
  • GigaCore12
  • GigaCore14R
  • GigaCore16Xt
  • GigaCore16RFO
  • GigaCore26i

Actions implemented

General actions:

• Identify the device
• Reboot
• Reset
• Recall a profile

Groups / Trunks:

• Set port to a specific group
• Set port to a specific trunk
• Increment the group or trunk of a port

Port settings:

• Enable, disable or toggle PoE on a port. Only available on PoE-capable ports on a PoE-capable switch.
• Enable, disable or toggle Link on a port

Feedbacks implemented

• Link State: Make text color Green if port has an active link
• Port Disabled: Make text color Grey if port is disabled
• Port Color: Set the background color to the color of the group or trunk assigned to the port
• Group Color: Set the background color to the color of a specific group

For PoE-capable ports on PoE-capable switches:

• PoE enabled on a certain port: make text color Green when PoE is enabled
• PoE sourcing on a certain port: make text color Green when PoE is sourcing

Presets implemented

General presets:

• Active profile name. Identify device when pressed
• Device name and active profile name. Identify device when pressed
• Reboot
• Reset

Groups / Trunks:

• For each group, button to set port 1 to the group. Can easily be modified to set another port to the group.

Ports:

• For each port, button to toggle the link
• For each port, button to increment the group or trunk of that port

For PoE-capable ports on PoE-capable switches:

• For each port, a button to toggle PoE

Profiles:

• For each profile slot: button to recall the profile

Variables implemented

Id	Name
device_name	Device Name
serial	Serial Number
mac_address	MAC address
model	Device Model
nr_ports	Number of network ports
poe_capable	PoE Support
active_profile_name	Active Profile Name
profile_${id}_name	Profile ${id} Name
group_${id}_name	Group ${id} Name
group_${id}_color	Group ${id} Color
trunk_${id}_name	Trunk ${id} Name
trunk_${id}_color	Trunk ${id} Color
port_${id}_legend	Port ${id} Legend
port_${id}_enabled	Port ${id} Enabled
port_${id}_up	Port ${id} Link up
port_${id}_protected	Port ${id} Protected
port_${id}_member_id	Port ${id} Member ID
port_${id}_member_type	Port ${id} Member Type
port_${id}_member_name	Port ${id} Member name
port_${id}_member_color	Port ${id} Member color
port_${id}_poe_enabled	Port ${id} PoE enabled
port_${id}_poe_sourcing	Port ${id} PoE state