LG

LG TV

This is module allows network control for most LG TVs manufactured since 2018.

Configuration

• Open the "All Settings" menu on the TV.
• The IP control settings live in one of two places, depending on the TV's webOS version:
  • Newer TVs (webOS 6 and later): All Settings > Support > IP Control Settings. On some models this is under General > Devices, or Support > Additional Settings.
  • Older TVs (2018-2021): open All Settings, move the focus onto "Connection" (called "Network" on some models) without entering it, then quickly press 82888 on the remote number pad to reveal the hidden menu.
• Note the MAC and IP addresses shown for client configuration. The MAC address is required to remotely power on the TV.
• Enable "Network IP Control".
• For TVs that require encryption, click "Generate Keycode" and note the 8 character code displayed. This keycode is required for all commands except power on. A new keycode can be generated at any time.
• To allow the TV to be powered on remotely, enable "Wake On LAN" (on newer TVs this may be in the same IP Control Settings screen, or under General > Devices > TV Management > Mobile TV On).

Actions

• Power on
• Power off
• Set input
• Send key
• Set volume
• Mute volume
• Set energy saving level (blank screen)
• Launch app (known app list or custom app ID)
• Set picture mode (Cinema/Game/Vivid/...)
• Set screen mute (blank keeping audio / video mute / unmute)

Feedbacks

• Power state (on/off/unknown)
• Mute state (muted/unmuted)
• IP Control enabled
• Volume compare (=, !=, >, >=, <, <=)
• Current app (known app list or custom app ID)
• Current input (HDMI/AV/Component/Live TV or custom input ID)
• Signal present (current input is receiving a signal)

Variables

• power_state — current power state (on/off/unknown)
• muted — mute state (true/false)
• volume — current volume (0-100)
• ip_control_enabled — IP control enabled (true/false)
• current_app — current streaming app friendly name (blank when on a physical input)
• current_input — current input friendly name, e.g. HDMI 1 (blank when in an app)
• current_app_id — current app/input raw id
• signal — input signal present (true/false, physical inputs only)
• hdcp_version — HDCP version of the current input
• hdcp_status — HDCP status of the current input

Presets

Ready-made buttons are grouped into categories: Power, Volume, Navigation (remote keys), Inputs, Apps, Picture Mode, Screen Mute, and Energy Saving. Power, Volume (mute), Inputs, and Apps buttons include feedback so the button highlights green when it matches the TV's current state.