Companion Module: Highpass Countdown

This module provides a simple countdown timer that can be displayed in a web browser and controlled from Companion.

Features

• Set a countdown time (HH:MM:SS).
• Start, pause, and stop the timer.
• Add or subtract time from the current countdown.
• Display the timer in a web browser on the network.
• Change the color of the timer based on its state (running, paused, stopped) and time remaining (amber and red warnings).
• Set top and bottom auxiliary text.
• Show the internal time on the web page.

Configuration

1. Web Server Port: The port on which the web server will run (default: 8080).
2. Show Internal Time: Display the computer's internal time on the web page.
3. Time Corner: Choose the corner of the screen to display the internal time.
4. Amber Time (seconds): The timer will turn amber when the remaining time is less than or equal to this value.
5. Red Time (seconds): The timer will turn red when the remaining time is less than or equal to this value.
6. Timer Font Size (vw): The font size of the timer as a percentage of the viewport width.
7. Aux Font Size (vw): The font size of the auxiliary text as a percentage of the viewport width.

Web Interface

To view the timer, open a web browser and navigate to http://<your-ip-address>:<port>. The IP address is that of the computer running Companion, and the port is the one configured in the module settings.

Presets

The module comes with a number of presets to get you started:

• Timer Display: A button that shows the current timer value and changes color based on the state.
• Start/Pause/Stop Timer: Buttons to control the timer.
• Set Timer: Buttons to set the timer to common values (1, 5, 10, 30, 60 minutes).
• Add/Subtract Minute: Buttons to add or subtract one minute from the timer.