HDTV WolfPackGreen HDMI Matrix

A module for controlling HDTV WolfPackGreen HDMI Matrix.

Support for Models

• HDTVFIX1600AE
• HDTVFIX1600E
• HDTVFIX800E

Available Commands

• Route single input to specific output
• Route single input to multiple outputs
• Select Inputs
• Select Outputs
• Apply Outputs
• Clear Selection
• Send Command
• Save Layout
• Recall Layout
• Unset Output
• Unset All Output
• Refresh Matrix Labels

Note: To use Apply Outputs, select an input, then select the outputs you want the input to go to, repeat for all of the input/outputs combinations you want to set and then run Apply Outputs action

Example Configuration

You can download an example configuration that is setup for all of the commands at https://raw.githubusercontent.com/bitfocus/companion-module-hdtv-wolfpackgreen/main/examples/HDTV%20Companion%20Example%20Configuration.companionconfig and then right-click and Save As.

The pages in the configuration are 95-99. The first button on pages 96-99 will take the action on the button on press and release but if you long press the button it will navigate to page 95. For page 99, there is a long press for buttons 1-3 to navigate to page 95, apply the selected outputs and clear the selected outputs.

Note: You will need to enable Companion OSC Listener in the Settings for the navigation buttons to work at they use generic OSC commands /press/bank/X Page/X button