d&b audiotechnik Amps

Specify the IP address of the amp you want to connect to.

Supported d&b audiotechnik Amps

• 5D
• 10D
• 30D
• 40D
• D20
• D40
• D80

Available commands for d&b audiotechnik Amps

• Power On/Off/Toggle
• Mute/Unmute/Toggle Channel A/B/C/D/All
• Select Array Processing Preset for Channel A/B/C/D/All (only for D20, other amplifiers will follow)
• Recall AmpPreset (not for 5D)
• Eq Bypass On/Off
• Eq Bypass Band On/Off
• Eq Clear Band
• Eq Clear All Bands
• Eq Set Band Parametric
• Eq Set All Bands Parametric
• Set Level Channel A/B/C/D
• Delay Set
• Delay Bypass ON/OFF
• Input Gain Enabled/Disabled

Available Variables for d&b audiotechnik Amps

• Amp Type
• Amp Name
• Amp Firmware
• Power State
• Mute State Channel A/B/C/D
• Amp Preset Names (not for 5D)
• Amp Preset States (not for 5D)
• Amp Preset Last Recall (not for 5D)
• Eq Bypass State
• Delay Bypass State
• Delay (UNIT: ms)
• Level Channel A/B/C/D
• Speaker ID per Channel
• Speaker Name per Channel
• Speaker Types
• Input Gain Enabled/Disabled

Available Feedbacks for d&b audiotechnik Amps

• Power State
• Mute State Channel A/B/C/D
• Amp Last Preset Recall (not for 5D)
• Amp Channel Eq Bypass A/B/C/D
• Amp Channel Delay Bypass A/B/C/D

EQ All JSON Format

• Band 1 to 16 (5D only 1 to 8)
• Type 1 to 5 (1 = Parametric 2 = Notch 3 = Low Shelf 4 = High Shelf 5 = Asymetric)
• Frequency in Hz 20 to 20000
• Gain in dB -18 to 12
• Q 0.5 to 25
• Slope 1 to 4 (1 = 6dB/Oct 2 = 12dB/Oct 3 = 18dB/Oct 4 = 24dB/Oct)

[
  {
    "band": 1,
    "type": 1,
    "freq1": 100,
    "gain": -3,
    "q": 1.5
  },
  {
    "band": 2,
    "type": 2,
    "freq1": 100,
    "q": 1.5
  },
  {
    "band": 3,
    "type": 3,
    "freq1": 100,
    "slope1": 1,
    "gain": -3
  },
  {
    "band": 4,
    "type": 4,
    "freq1": 100,
    "slope1": 1,
    "gain": -3
  },
  {
    "band": 4,
    "type": 4,
    "freq1": 100,
    "freq2": 200,
    "slope1": 1,
    "slope2": 2,
    "gain": -3
  }
]