# Evertz Quartz

> How an Evertz Quartz router's size, Levels, None source and destination locks work in Buttons.

An Evertz Quartz connection exposes the router's Video Level and its audio Levels, so you can route a source's video and audio together or send them to a destination separately. Buttons also reads and sets destination locks, including locks held by a Q-Link panel.

## Before you begin

- An Evertz Quartz connection already added and connected, running module version 3.1. See [Update a connection's module safely](/docs/buttons/v1.8/connections/module-compatibility) if you need to check or change the installed module version.
- Access to **Connect → Connection** to check configuration, and to **Routing** to take and verify routes.

## Set the router size and Levels in the module

Buttons doesn't ask for the router's size or Levels a second time. It reads them from the Evertz Quartz module's own configuration:

- **Sources and destinations:** the number of sources and destinations set in the module. If the module has no valid size, Buttons uses 16 sources and 16 destinations.
- **Levels:** the level system set in the module: **8**, **16** or **MAGNUM**. If none is set, Buttons uses the 8-level system.

Buttons always includes the Video Level, labeled **Video**. Each of the remaining Levels becomes an audio Level, labeled **Audio 1**, **Audio 2** and so on in the router's own level order.

Source and destination names come from the router, so the names set on the Quartz system appear in Buttons.

## Route Levels together or separately

Each source and destination is a bundle with one port per Level. Taking a route for the whole bundle routes every Level in one command to the router. To route only some of them, for example only the audio, see [Route only one part of a bundle](/docs/buttons/v1.8/routing/take-a-route#route-only-one-part-of-a-bundle).

A Level only routes to the same Level on the destination: Video goes to Video, Audio 1 to Audio 1. You can't send one source's Audio 1 to another destination's Audio 2.

## Choose a black or silent "None" source

The Quartz router has no separate disconnect command. You can choose a physical source to stand in for one. Open the connection's configuration and set **None / black / silent source** to **First source** or **Last source**, matching the source on the router that is wired to black or silence. Leave it at **Off** if no source is used this way.

When that source is routed to a destination, the destination shows `---` instead of a source name.

## Lock and unlock destinations

Lock and unlock controls appear on Evertz Quartz destinations wherever locking is enabled: see [Manage locking](/docs/buttons/v1.8/positions/router-sections#manage-locking) and [Understand route status](/docs/buttons/v1.8/routing/understand-route-status#interpret-lock-indicators).

- A lock covers the whole destination: locking it locks every Level of that destination together.
- A lock set from Buttons, or by another controller on the router, shows as a **user lock**.
- A lock held by a Q-Link panel shows as a lock reported by the device. Clear it from that panel.

Buttons doesn't route over a locked destination unless the operator overrides the lock.

## If you get stuck

| What you see | What to try |
| --- | --- |
| The Routing view shows 16 sources and 16 destinations, but the router is bigger. | Set the router size in the Evertz Quartz module's configuration. |
| Audio Levels are missing, or there are more than expected. | Check the level system in the module: **8**, **16** or **MAGNUM**. |
| A route to one destination is refused. | The destination may be locked. Check the lock icon, and clear a Q-Link lock from its panel. |
| A destination shows `---`. | The source chosen as **None / black / silent source** is routed to it. |

## Where to go next

- [Check what a router integration supports](/docs/buttons/v1.8/connections/router-integrations), for how this compares with other router modules.
- [Take a physical route](/docs/buttons/v1.8/routing/take-a-route), including routing only one part of a bundle.
- [Add a Router Section to a position](/docs/buttons/v1.8/positions/router-sections), for lock and unlock controls on a surface.
